PartsTable
Technical Data Sheet
Download PDF

CM27689-2 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

CM27689-2: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.482 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.375 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.656 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-812-6813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CM27689-2
NSN: 5905-00-812-6813
FSC: 5905 — Resistor
CAGE: 12697 — CLAROSTAT SENSORS AND CONTROLS (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.482 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.375 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.656 INCHES MAXIMUM IN
overall_length0.857 INCHES NOMINAL IN
shaft_diameter0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
mounting_methodSTANDARD BUSHING
overall_diameter0.938 INCHES MAXIMUM IN
section_quantity1
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
NSN5905-00-812-6813
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN CM27689-2 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
BODY DIAMETER: 0.656 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 500.0 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 120.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
BODY STYLE: CYLINDRICAL BUSHING MOUNTED
•
OVERALL DIAMETER: 0.938 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.656 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION500.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER0.938 INCHES MAXIMUM IN
MOUNTING METHODSTANDARD BUSHING
OVERALL LENGTH0.857 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
225014-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CM27689-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CM27689-2?
CM27689-2 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace CM27689-2?
There is 1 known substitute for CM27689-2: 225014-6. Substitute compatibility should be verified for your specific system.
What is the NSN for CM27689-2?
CM27689-2 is cataloged in the U.S. Government catalog under NSN 5905-00-812-6813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CM27689-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.