CM27192-8 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

CM27192-8: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.580 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, actuator_type: SINGLE SHAFT, body_diameter: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-079-9348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CM27192-8

NSN: 5905-00-079-9348
FSC: 5905 — Resistor
CAGE: 12697 — CLAROSTAT SENSORS AND CONTROLS (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.580 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
actuator_type	SINGLE SHAFT
body_diameter	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
overall_length	1.220 INCHES NOMINAL IN
shaft_diameter	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
mounting_method	LOCKING BUSHING
overall_diameter	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
section_quantity	1
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
NSN	5905-00-079-9348

COMPONENT DIAGRAM

KEY FEATURES

•

NONTURN DEVICE LOCATION: AT 6 OCLOCK

•

BODY DIAMETER: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 5.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN

•

NONTURN DEVICE RADIUS: 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

NONTURN DEVICE LOCATION	AT 6 OCLOCK
BODY DIAMETER	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NONTURN DEVICE RADIUS	0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 4

08W1-2287Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

APW1-2-104-8Reference document

Same NSN cross-reference

Reference document — Secondary reference

576R080H08Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AP05C13J8Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy CM27192-8?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CM27192-8?

CM27192-8 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace CM27192-8?

There are 4 known substitutes for CM27192-8: 08W1-2287, APW1-2-104-8, 576R080H08 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for CM27192-8?

CM27192-8 is cataloged in the U.S. Government catalog under NSN 5905-00-079-9348. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CM27192-8 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — CM27192-8