Name: CAPACITOR,VARIABLE,CERAMIC DIELE
Brand: Unknown
SKU: CM15C820JN3

CM15C820JN3 ✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

CAPACITOR,VARIABLE,CERAMIC DIELE. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.190 INCHES NOMINAL IN, body_height: 0.300 INCHES NOMINAL IN, body_length: 0.520 INCHES NOMINAL IN, inclosure_type: ENCAPSULATED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-556-9440, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CM15C820JN3

NSN: 5910-00-556-9440
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width	0.190 INCHES NOMINAL IN
body_height	0.300 INCHES NOMINAL IN
body_length	0.520 INCHES NOMINAL IN
inclosure_type	ENCAPSULATED
terminal_length	1.120 INCHES MINIMUM IN
reliability_indicator	NOT ESTABLISHED
adjustment_device_torque	4.000 INCH-OUNCES MINIMUM AND 24.000 INCH-OUNCES MAXIMUM IN
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
NSN	5910-00-556-9440

COMPONENT DIAGRAM

KEY FEATURES

•

DISSIPATION FACTOR AT 25 DEG CELSIUS IN PERCENT: 0.2

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 0.438 INCHES NOMINAL IN

•

NONDERATED VOLTAGE RATING AND TYPE: 500.0 DC CONTINUOUS SINGLE SECTION

•

CAPACITANCE CHANGE IN PERCENT AT OPERATING TEMP FROM 25 DEG CELSIUS: -4.50 TO 2.00 MINIMUM AND -2.50 TO 2.00 MAXIMUM SINGLE SECTION

•

CAPACITANCE DRIFT IN PICOFARADS: 0.50 SINGLE SECTION

•

TERMINAL TYPE AND QUANTITY: 2 TAB, SOLDER LUG

•

CAPACITANCE RANGE IN PICOFARADS: +1.5 TO 7.0 SINGLE SECTION

•

BODY LENGTH: 0.840 INCHES NOMINAL IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS (FLIS)

DISSIPATION FACTOR AT 25 DEG CELSIUS IN PERCENT	0.2
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.438 INCHES NOMINAL IN
NONDERATED VOLTAGE RATING AND TYPE	500.0 DC CONTINUOUS SINGLE SECTION
CAPACITANCE CHANGE IN PERCENT AT OPERATING TEMP FROM 25 DEG CELSIUS	-4.50 TO 2.00 MINIMUM AND -2.50 TO 2.00 MAXIMUM SINGLE SECTION
CAPACITANCE DRIFT IN PICOFARADS	0.50 SINGLE SECTION
TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG
CAPACITANCE RANGE IN PICOFARADS	+1.5 TO 7.0 SINGLE SECTION
BODY LENGTH	0.840 INCHES NOMINAL IN
TEST DATA DOCUMENT	81349-MIL-C-81 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY	1 SLOTTED SCREW

VERIFIED SUBSTITUTES & CROSS-REFERENCES 29

050-002139Interchangeable