Name: CAPACITOR,FIXED,MICA DIELECTRIC
Brand: Unknown
SKU: CM10FD391JP3

CM10FD391JP3 ✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.400 INCHES MAXIMUM IN, body_height: 0.120 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, body_length: 0.400 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN, terminal_length: 1.000 INCHES MINIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-044-3582, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CM10FD391JP3

NSN: 5910-01-044-3582
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.400 INCHES MAXIMUM IN
body_height	0.120 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
body_length	0.400 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
terminal_length	1.000 INCHES MINIMUM IN
terminal_diameter	0.025 INCHES NOMINAL IN
reliability_indicator	ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
NSN	5910-01-044-3582

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD

•

BODY LENGTH: 0.400 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN

•

TERMINAL DIAMETER: 0.025 INCHES NOMINAL IN

•

DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 0.0008

•

BODY HEIGHT: 0.120 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN

•

INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP: 5000.0 MEGOHMS

•

CAPACITANCE VALUE PER SECTION: 390.000 PICOFARADS SINGLE SECTION

•

TERMINAL SURFACE TREATMENT: SOLDER

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS (FLIS)

TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
BODY LENGTH	0.400 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
TERMINAL DIAMETER	0.025 INCHES NOMINAL IN
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.0008
BODY HEIGHT	0.120 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	5000.0 MEGOHMS
CAPACITANCE VALUE PER SECTION	390.000 PICOFARADS SINGLE SECTION
TERMINAL SURFACE TREATMENT	SOLDER
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS	+0.0 TO 70.0 SINGLE SECTION
TEST DATA DOCUMENT	81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

VERIFIED SUBSTITUTES & CROSS-REFERENCES 28

4059-172PC9Interchangeable