PartsTable
Technical Data Sheet
PartsTable / MRO / CM10FD131J03
CM10FD131J03 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.370 INCHES MAXIMUM IN, body_height: 0.095 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, body_length: 0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, terminal_length: 1.000 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-220-3408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CM10FD131J03
NSN: 5910-00-220-3408
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.370 INCHES MAXIMUM IN
body_height0.095 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
body_length0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
terminal_length1.000 INCHES MINIMUM IN
terminal_diameter0.025 INCHES NOMINAL IN
reliability_indicatorESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
NSN5910-00-220-3408
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,MICA DIELECTRIC TITLE COMPONENT PN CM10FD131J03 MFR CAPACITOR,FIXED,MICA D
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 0.194 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
•
BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
•
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
•
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS: +0.0 TO 70.0 SINGLE SECTION
•
TERMINAL SURFACE TREATMENT: SOLDER
•
MATERIAL: PLASTIC CASE
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 0.0008
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.194 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
BODY STYLEW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS+0.0 TO 70.0 SINGLE SECTION
TERMINAL SURFACE TREATMENTSOLDER
MATERIALPLASTIC CASE
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.0008
INSULATION RESISTANCE AT REFERENCE TEMP100000.0 MEGOHMS
TEST DATA DOCUMENT81349-MIL-C-5+18 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
CM05F131G03Interchangeable
interchangeable cross-reference
interchangeable
220346-206Interchangeable
interchangeable cross-reference
interchangeable
RDM15F131J3SInterchangeable
interchangeable cross-reference
interchangeable
CM10FD131G03Interchangeable
Same NIIN cross-reference
interchangeable
MILC5-18Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CM10FD131J03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CM10FD131J03?
CM10FD131J03 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace CM10FD131J03?
There are 5 known substitutes for CM10FD131J03: CM05F131G03, 220346-206, RDM15F131J3S and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CM10FD131J03?
CM10FD131J03 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-220-3408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CM10FD131J03

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026