CM06EA162J03 — CAPACITOR,FIXED,MICA DIELECTRIC

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

CM06EA162J03: CAPACITOR,FIXED,MICA DIELECTRIC.

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.530 INCHES MAXIMUM IN, body_height: 0.120 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN, body_length: 0.570 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN, terminal_length: 1.000 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-058-0229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CM06EA162J03

NSN: 5910-01-058-0229
FSC: 5910 — Capacitors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.530 INCHES MAXIMUM IN
body_height	0.120 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
body_length	0.570 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
terminal_length	1.000 INCHES MINIMUM IN
terminal_diameter	0.032 INCHES NOMINAL IN
reliability_indicator	ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
NSN	5910-01-058-0229

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.032 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.000 INCHES MINIMUM IN

•

BODY WIDTH: 0.530 INCHES MAXIMUM IN

•

BODY HEIGHT: 0.120 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.032 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.000 INCHES MINIMUM IN
BODY WIDTH	0.530 INCHES MAXIMUM IN
BODY HEIGHT	0.120 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS	+0.0 TO 70.0 SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.0100

SUBSTITUTES & CROSS-REFERENCES 7

10180332-015Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

0160-2223Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

HP19162J3C1Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

F118Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-PRF-39001/5Reference document

Same NSN cross-reference

Reference document — Identification reference

103-000135Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy CM06EA162J03?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CM06EA162J03?

CM06EA162J03 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).

What parts can replace CM06EA162J03?

There are 7 known substitutes for CM06EA162J03: 10180332-015, 0160-2223, HP19162J3C1 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for CM06EA162J03?

CM06EA162J03 is cataloged in the U.S. Government catalog under NSN 5910-01-058-0229. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CM06EA162J03 — CAPACITOR,FIXED,MICA DIELECTRIC

Request a Quote — CM06EA162J03