PartsTable
Technical Data Sheet
PartsTable / MRO / CM04FD181JP3
CM04FD181JP3 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.370 INCHES MAXIMUM IN, body_height: 0.120 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, body_length: 0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, terminal_length: 1.000 INCHES MINIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-057-4380, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CM04FD181JP3
NSN: 5910-01-057-4380
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.370 INCHES MAXIMUM IN
body_height0.120 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
body_length0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
terminal_length1.000 INCHES MINIMUM IN
terminal_diameter0.016 INCHES NOMINAL IN
reliability_indicatorESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-39001/5 GOVERNMENT SPECIFICATION
NSN5910-01-057-4380
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,MICA DIELECTRIC TITLE COMPONENT PN CM04FD181JP3 MFR CAPACITOR,FIXED,MICA D
KEY FEATURES
•
RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.0100
•
TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PERCENT SINGLE SECTION
•
SCHEMATIC DIAGRAM DESIGNATOR: NO COMMON OR GROUNDED ELECTRODE(S)
•
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS: +0.0 TO 70.0 SINGLE SECTION
•
BODY WIDTH: 0.370 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 0.150 INCHES NOMINAL IN
•
BODY LENGTH: 0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
TERMINAL DIAMETER: 0.016 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.0100
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS+0.0 TO 70.0 SINGLE SECTION
BODY WIDTH0.370 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.150 INCHES NOMINAL IN
BODY LENGTH0.300 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
TERMINAL DIAMETER0.016 INCHES NOMINAL IN
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT81349-MIL-C-39001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
MILC5-18Interchangeable
interchangeable cross-reference
interchangeable
CM06FD202JD3Interchangeable
interchangeable cross-reference
interchangeable
10046526-7Interchangeable
interchangeable cross-reference
interchangeable
DM10F301J0300WV4Interchangeable
interchangeable cross-reference
interchangeable
CM04FA301J03Interchangeable
interchangeable cross-reference
interchangeable
CM04FC301J03Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CM04FD181JP3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CM04FD181JP3?
CM04FD181JP3 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace CM04FD181JP3?
There are 28 known substitutes for CM04FD181JP3: MILC5-18, CM06FD202JD3, 10046526-7 and 25 more. Substitute compatibility should be verified for your specific system.
Is CM04FD181JP3 still available?
CM04FD181JP3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CM04FD181JP3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026