CM-78112-11 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

CM-78112-11: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, overall_length: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN, undercut_width: 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN, first_end_style: CHAMFERED, undercut_radius: 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-944-1098, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

CM-78112-11

NSN: 5315-00-944-1098
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 0EGF1 — CMP HYDRAULICS INC. (USA)

SPECIFICATIONS

diameter	0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM IN
material	STEEL CORROSION RESISTING OVERALL
overall_length	0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
undercut_width	0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
first_end_style	CHAMFERED
undercut_radius	0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
effective_length	0.573 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
style_designator	GROOVE
undercut_diameter	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
first_end_location	BOTH ENDS
first_end_taper_angle	43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
first_end_taper_length	0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
NSN	5315-00-944-1098

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN

•

UNDERCUT DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN

•

FIRST END LOCATION: BOTH ENDS

•

FIRST END STYLE: CHAMFERED

•

STYLE DESIGNATOR: GROOVE

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
UNDERCUT DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FIRST END LOCATION	BOTH ENDS
FIRST END STYLE	CHAMFERED
STYLE DESIGNATOR	GROOVE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.1240 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM IN
OVERALL LENGTH	0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
FIRST END TAPER ANGLE	43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

78112-11Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy CM-78112-11?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CM-78112-11?

CM-78112-11 is a PIN,GROOVED,HEADLESS.

What parts can replace CM-78112-11?

There is 1 known substitute for CM-78112-11: 78112-11. Substitute compatibility should be verified for your specific system.

What is the NSN for CM-78112-11?

CM-78112-11 is cataloged in the U.S. Government catalog under NSN 5315-00-944-1098. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CM-78112-11 — PIN,GROOVED,HEADLESS

Request a Quote — CM-78112-11