PartsTable
Technical Data Sheet

CLP-3/4 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CLP-3/4: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, mounting_method: UNTHREADED HOLE(S), special_features: MOLDED HOLDING CLIP HOLDING RANGE 5/8 IN - 7/8 IN IN, end_item_identification: BOAT,WORK 40 FT 40WB0501 THRU 40WB0510 FT, part_name_assigned_by_controlling_agency: HOLDING CLIP. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-546-0163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CLP-3/4
NSN: 5340-01-546-0163
FSC: 5340 — Hardware, Commercial
CAGE: 4F861 — FISHERIES SUPPLY CO DIV FISHERIES SUPPLY COMPANY (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
mounting_methodUNTHREADED HOLE(S)
special_featuresMOLDED HOLDING CLIP HOLDING RANGE 5/8 IN - 7/8 IN IN
end_item_identificationBOAT,WORK 40 FT 40WB0501 THRU 40WB0510 FT
mounting_facility_quantity2
part_name_assigned_by_controlling_agencyHOLDING CLIP
NSN5340-01-546-0163
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CLP-3/4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
MOUNTING METHODUNTHREADED HOLE(S)
SPECIAL FEATURESMOLDED HOLDING CLIP HOLDING RANGE 5/8 IN - 7/8 IN IN
PART NAME ASSIGNED BY CONTROLLING AGENCYHOLDING CLIP
END ITEM IDENTIFICATIONBOAT,WORK 40 FT 40WB0501 THRU 40WB0510 FT
MATERIALPLASTIC OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CLP-3/4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CLP-3/4?
CLP-3/4 is a CLIP,SPRING TENSION.
What is the NSN for CLP-3/4?
CLP-3/4 is cataloged in the U.S. Government catalog under NSN 5340-01-546-0163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CLP-3/4