PartsTable / COMPONENT / CLE9-16
CLE9-16
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-8504, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
CLE9-16
NSN: 5340-00-200-8504 FSC: 5340 CAGE: 05593 — SAFRAN ELECTRICAL COMPONENTS USA, INC DIV SAFRAN ELECTRICAL COMPONENTS USA (USA)
SPECIFICATIONS
diameter 0.203 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.060 INCHES NOMINAL IN loop_inside_diameter 0.563 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.826125 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.623 INCHES NOMINAL IN NSN 5340-00-200-8504
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: CLE9-16
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.623 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• DIAMETER: 0.203 INCHES NOMINAL IN
• LOOP INSIDE DIAMETER: 0.563 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH 0.500 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.623 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN MATERIAL PLASTIC BAND STYLE DESIGNATOR SINGLE LOOP DIAMETER 0.203 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.623 INCHES NOMINAL IN LOOP INSIDE DIAMETER 0.563 INCHES NOMINAL IN MATERIAL PLASTIC BAND DIAMETER 0.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
102094 Interchangeable interchangeable cross-reference
interchangeable
6916 Interchangeable interchangeable cross-reference
interchangeable
XH-4473 Interchangeable interchangeable cross-reference
interchangeable
1916S Interchangeable interchangeable cross-reference
interchangeable
34599 Interchangeable interchangeable cross-reference
interchangeable
1589 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy CLE9-16?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CLE9-16?
CLE9-16 is a CLAMP,LOOP.
What parts can replace CLE9-16?
There are 12 known substitutes for CLE9-16: 102094, 6916, XH-4473 and 9 more. Substitute compatibility should be verified for your specific system.
Is CLE9-16 still available?
CLE9-16 is currently cancelled.
Request a Quote — CLE9-16