PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CLA-440-2
CLA-440-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, nut_style: CLINCH, nut_height: 0.147 INCHES NOMINAL IN, nut_diameter: 0.250 INCHES NOMINAL IN, pilot_length: 0.054 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-027-6138, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CLA-440-2
NSN: 5310-00-027-6138
FSC: 5310
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
nut_styleCLINCH
nut_height0.147 INCHES NOMINAL IN
nut_diameter0.250 INCHES NOMINAL IN
pilot_length0.054 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.185 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
NSN5310-00-027-6138
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CLA-440-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 40
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
THREAD CLASS: 2B
•
NUT DIAMETER: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
PILOT LENGTH: 0.054 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH40
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.112 INCHES IN
THREAD CLASS2B
NUT DIAMETER0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
PILOT LENGTH0.054 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY OVERALL
NUT STYLECLINCH
PILOT DIAMETER0.185 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
440NKA-(0.056)Interchangeable
Same NIIN cross-reference
interchangeable
M45938/1-7AInterchangeable
Same NIIN cross-reference
interchangeable
MIL-N-45938/1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CLA-440-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CLA-440-2?
CLA-440-2 is a NUT,PLAIN,CLINCH.
What parts can replace CLA-440-2?
There are 3 known substitutes for CLA-440-2: 440NKA-(0.056), M45938/1-7A, MIL-N-45938/1. Substitute compatibility should be verified for your specific system.
Is CLA-440-2 still available?
CLA-440-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CLA-440-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026