PartsTable
Technical Data Sheet
Download PDF

CL70BP1CP — PLUNGER,QUICK RELEASE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CL70BP1CP: PLUNGER,QUICK RELEASE.

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_length: 0.750 INCHES NOMINAL IN, overall_length: 0.750 INCHES NOMINAL IN, special_features: NYLON LOCKING INSERT,MIL-M-20693, nominal_thread_size: 0.500 INCHES IN, thread_quantity_per_inch: 13. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-228-2852, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CL70BP1CP
NSN: 5340-00-228-2852
FSC: 5340 — Hardware, Commercial
CAGE: 99862 — CARR LANE MANUFACTURING CO (USA)
SPECIFICATIONS
shapeROUND
thread_length0.750 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
special_featuresNYLON LOCKING INSERT,MIL-M-20693
nominal_thread_size0.500 INCHES IN
thread_quantity_per_inch13
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-00-228-2852
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CL70BP1CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.750 INCHES NOMINAL IN
•
SHAPE: ROUND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
THREAD QUANTITY PER INCH: 13
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
THREAD LENGTH0.750 INCHES NOMINAL IN
SHAPEROUND
OVERALL LENGTH0.750 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.500 INCHES IN
SPECIAL FEATURESNYLON LOCKING INSERT,MIL-M-20693
THREAD QUANTITY PER INCH13
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 3
W-8NSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10807-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
349AS112-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CL70BP1CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL70BP1CP?
CL70BP1CP is a PLUNGER,QUICK RELEASE.
What parts can replace CL70BP1CP?
There are 3 known substitutes for CL70BP1CP: W-8N, 10807-1, 349AS112-2. Substitute compatibility should be verified for your specific system.
What is the NSN for CL70BP1CP?
CL70BP1CP is cataloged in the U.S. Government catalog under NSN 5340-00-228-2852. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL70BP1CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.