PartsTable
Technical Data Sheet
Download PDF

CL3030 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CL3030: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, material: STEEL COMP 1020 OVERALL, head_style: FLAT, chamfer_length: 0.031 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-266-7610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CL3030
NSN: 5315-00-266-7610
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77873 — ROCKFORD POWERTRAIN INC DIV POWERTRAIN ROCKFORD, INC. (USA)
SPECIFICATIONS
height0.062 INCHES NOMINAL IN
diameter0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
materialSTEEL COMP 1020 OVERALL
head_styleFLAT
chamfer_length0.031 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
pin_head_diameter0.312 INCHES NOMINAL IN
under_head_length1.656 INCHES NOMINAL IN
first_hole_diameter0.081 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
distance_from_centerline_of_hole_to_end_of_pin0.125 INCHES NOMINAL IN
NSN5315-00-266-7610
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CL3030 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.031 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.656 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.081 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.312 INCHES NOMINAL IN
•
DIAMETER: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.031 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.656 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.081 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.312 INCHES NOMINAL IN
DIAMETER0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HEAD STYLEFLAT
HEIGHT0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
26032DSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
50557Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CL3030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL3030?
CL3030 is a PIN,STRAIGHT,HEADED.
What parts can replace CL3030?
There are 2 known substitutes for CL3030: 26032D, 50557. Substitute compatibility should be verified for your specific system.
What is the NSN for CL3030?
CL3030 is cataloged in the U.S. Government catalog under NSN 5315-00-266-7610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL3030

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.