PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CL2-250
CL2-250 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN, material: IRON BAND, overall_width: 0.875 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-618-4178, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CL2-250
NSN: 5340-00-618-4178
FSC: 5340
CAGE: 80266 — AP PARTS CO INDUSTRIAL SALES DIV (USA)
SPECIFICATIONS
diameter0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
materialIRON BAND
overall_width0.875 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.125 INCHES NOMINAL IN
loop_inside_diameter2.600 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.550 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end2.425 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.925 INCHES NOMINAL IN
NSN5340-00-618-4178
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CL2-250 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 2.600 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.550 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.925 INCHES NOMINAL IN
•
DIAMETER: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END: 2.425 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER2.600 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.550 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.925 INCHES NOMINAL IN
DIAMETER0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END2.425 INCHES NOMINAL IN
OVERALL WIDTH0.875 INCHES NOMINAL IN
MATERIALIRON BAND
STYLE DESIGNATORCENTER MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2250-0000-26012Upgraded Successor
successor cross-reference
successor
2250Upgraded Successor
successor cross-reference
successor
304655Interchangeable
interchangeable cross-reference
interchangeable
302034Interchangeable
interchangeable cross-reference
interchangeable
HT01614-2Interchangeable
interchangeable cross-reference
interchangeable
304655-003Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CL2-250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL2-250?
CL2-250 is a CLAMP,LOOP.
What parts can replace CL2-250?
There are 7 known substitutes for CL2-250: 2250-0000-26012, 2250, 304655 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CL2-250?
CL2-250 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-618-4178. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL2-250

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026