PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CL12DEP3-5
CL12DEP3-5 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,QUICK RELEASE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 SHANK, grip_length: 3.500 INCHES MINIMUM AND 3.520 INCHES MAXIMUM IN, head_diameter: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, actuation_type: PULL AND PUSH, shank_diameter: 0.7477 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN, hardness_rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM SHANK. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-837-3006, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CL12DEP3-5
NSN: 5315-00-837-3006
FSC: 5315
CAGE: 99862 — CARR LANE MANUFACTURING CO (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 SHANK
grip_length3.500 INCHES MINIMUM AND 3.520 INCHES MAXIMUM IN
head_diameter0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
actuation_typePULL AND PUSH
shank_diameter0.7477 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN
detent_quantity2
hardness_rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM SHANK
style_designatorRING HANDLE
surface_treatmentCADMIUM AND CHROMATE SHANK
ring_handle_diameter1.500 INCHES MINIMUM AND 1.687 INCHES MAXIMUM IN
shoulder_to_head_end_distance0.380 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
detent_to_tapered_end_distance0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NSN5315-00-837-3006
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CL12DEP3-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHANK
•
SHOULDER TO HEAD END DISTANCE: 0.380 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 FED SPEC SINGLE MATERIAL RESPONSE SHANK
•
DETENT TO TAPERED END DISTANCE: 0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RING HANDLE
•
SURFACE TREATMENT: CADMIUM AND CHROMATE SHANK
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM SHANK
•
MATERIAL: STEEL COMP 4130 SHANK
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHANK
SHOULDER TO HEAD END DISTANCE0.380 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 FED SPEC SINGLE MATERIAL RESPONSE SHANK
DETENT TO TAPERED END DISTANCE0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
STYLE DESIGNATORRING HANDLE
SURFACE TREATMENTCADMIUM AND CHROMATE SHANK
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM SHANK
MATERIALSTEEL COMP 4130 SHANK
DETENT QUANTITY2
GRIP LENGTH3.500 INCHES MINIMUM AND 3.520 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
81007Interchangeable
interchangeable cross-reference
interchangeable
421Interchangeable
interchangeable cross-reference
interchangeable
2409Interchangeable
interchangeable cross-reference
interchangeable
0130-22Interchangeable
interchangeable cross-reference
interchangeable
4173-2409Interchangeable
interchangeable cross-reference
interchangeable
4173-2409D6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CL12DEP3-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL12DEP3-5?
CL12DEP3-5 is a PIN,QUICK RELEASE.
What parts can replace CL12DEP3-5?
There are 22 known substitutes for CL12DEP3-5: 81007, 421, 2409 and 19 more. Substitute compatibility should be verified for your specific system.
Is CL12DEP3-5 still available?
CL12DEP3-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL12DEP3-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026