PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CL-31-SPS-1
CL-31-SPS-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_length: 0.469 INCHES NOMINAL IN, overall_length: 0.534 INCHES NOMINAL IN, end_pressure_rating: 6.250 POUNDS NOMINAL LBS, nominal_thread_size: 0.190 INCHES IN, thread_quantity_per_inch: 32. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-077-4987, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CL-31-SPS-1
NSN: 5340-01-077-4987
FSC: 5340
CAGE: 99862 — CARR LANE MANUFACTURING CO (USA)
SPECIFICATIONS
shapeROUND
thread_length0.469 INCHES NOMINAL IN
overall_length0.534 INCHES NOMINAL IN
end_pressure_rating6.250 POUNDS NOMINAL LBS
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5340-01-077-4987
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CL-31-SPS-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.469 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
END PRESSURE RATING: 6.250 POUNDS NOMINAL LBS
•
SHAPE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.469 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH32
NOMINAL THREAD SIZE0.190 INCHES IN
OVERALL LENGTH0.534 INCHES NOMINAL IN
END PRESSURE RATING6.250 POUNDS NOMINAL LBS
SHAPEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
M-52Upgraded Successor
successor cross-reference
successor
FLR359Upgraded Successor
successor cross-reference
successor
5253-250Upgraded Successor
successor cross-reference
successor
339084-2Upgraded Successor
successor cross-reference
successor
M52NUpgraded Successor
successor cross-reference
successor
M29AUInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CL-31-SPS-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL-31-SPS-1?
CL-31-SPS-1 is a PLUNGER,QUICK RELEASE.
What parts can replace CL-31-SPS-1?
There are 20 known substitutes for CL-31-SPS-1: M-52, FLR359, 5253-250 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CL-31-SPS-1?
CL-31-SPS-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-077-4987. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL-31-SPS-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026