PartsTable
Technical Data Sheet
PartsTable / O-RING / CL-2 GR-60
CL-2 GR-60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, center_hole_diameter: 6.949 INCHES MINIMUM AND 6.995 INCHES MAXIMUM IN, cross-sectional_height: 0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-3363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CL-2 GR-60
NSN: 5331-00-291-3363
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
center_hole_diameter6.949 INCHES MINIMUM AND 6.995 INCHES MAXIMUM IN
cross-sectional_height0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
NSN5331-00-291-3363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CL-2 GR-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 6.949 INCHES MINIMUM AND 6.995 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
CROSS-SECTIONAL HEIGHT: 0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER6.949 INCHES MINIMUM AND 6.995 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
CROSS-SECTIONAL HEIGHT0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
ADS100Interchangeable
interchangeable cross-reference
interchangeable
5330PL0162892Interchangeable
interchangeable cross-reference
interchangeable
714360-039Interchangeable
interchangeable cross-reference
interchangeable
600-015 1-4Interchangeable
interchangeable cross-reference
interchangeable
GS570C4AInterchangeable
interchangeable cross-reference
interchangeable
AMS-R-6855Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CL-2 GR-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL-2 GR-60?
CL-2 GR-60 is a O-RING.
What parts can replace CL-2 GR-60?
There are 18 known substitutes for CL-2 GR-60: ADS100, 5330PL0162892, 714360-039 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CL-2 GR-60?
CL-2 GR-60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-3363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL-2 GR-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026