PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CL-150M
CL-150M ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BENDER,TUBE,HAND is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, diameter: 0.344 INCHES NOMINAL IN, material: IRON OVERALL, unit_type: GEARED RATCHET, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-900-4216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CL-150M
NSN: 5340-00-900-4216
FSC: 5340
CAGE: 03743 — EGS ELECTRICAL GROUP APPLETON DIV (USA)
SPECIFICATIONS
cushionNOT INCLUDED
diameter0.344 INCHES NOMINAL IN
materialIRON OVERALL
unit_typeGEARED RATCHET
mounting_padNOT INCLUDED
overall_width0.750 INCHES NOMINAL IN
overall_length3.500 INCHES NOMINAL IN
special_featuresONE HOLE CLAMP FOR USE WITH RIGID METAL CONDUIT OR IMC
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.375 INCHES NOMINAL IN
mounting_hole_size0.375 INCHES NOMINAL IN
NSN5340-00-900-4216
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CL-150M MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 1.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC
•
MATERIAL: IRON MALLEABLE LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
MOUNTING PAD: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 1.500 INCHES NOMINAL IN
•
INSIDE DIAMETER/ARCH LENGTH: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE1.500 INCHES NOMINAL IN
SURFACE TREATMENTZINC
MATERIALIRON MALLEABLE LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
OVERALL LENGTH3.500 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.500 INCHES NOMINAL IN
INSIDE DIAMETER/ARCH LENGTH1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.375 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
50-190411AAAA1Interchangeable
interchangeable cross-reference
interchangeable
AK4Interchangeable
interchangeable cross-reference
interchangeable
CL150Interchangeable
interchangeable cross-reference
interchangeable
00606296006742Interchangeable
interchangeable cross-reference
interchangeable
CL-150MInterchangeable
interchangeable cross-reference
interchangeable
138-00043-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CL-150M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL-150M?
CL-150M is a BENDER,TUBE,HAND.
What parts can replace CL-150M?
There are 11 known substitutes for CL-150M: 50-190411AAAA1, AK4, CL150 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CL-150M?
CL-150M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-900-4216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL-150M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026