PartsTable
Technical Data Sheet
PartsTable / MRO / CKR13BX104KP
CKR13BX104KP ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.490 INCHES NOMINAL IN, body_diameter: 0.190 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN, terminal_diameter: 0.025 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-111-4958, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CKR13BX104KP
NSN: 5910-00-111-4958
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.490 INCHES NOMINAL IN
body_diameter0.190 INCHES NOMINAL IN
terminal_length1.250 INCHES MINIMUM IN
terminal_diameter0.025 INCHES NOMINAL IN
reliability_indicatorESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-39014/6 GOVERNMENT SPECIFICATION
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
NSN5910-00-111-4958
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN CKR13BX104KP MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
RELIABILITY FAILURE RATE LEVEL IN PERCENT: 0.1000
•
CAPACITANCE VALUE PER SECTION: 0.100 MICROFARADS SINGLE SECTION
•
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP: 10000.0 MEGOHMS
•
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
•
TEST DATA DOCUMENT: 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
BODY DIAMETER: 0.190 INCHES NOMINAL IN
•
SCHEMATIC DIAGRAM DESIGNATOR: NO COMMON OR GROUNDED ELECTRODE(S)
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.1000
CAPACITANCE VALUE PER SECTION0.100 MICROFARADS SINGLE SECTION
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP10000.0 MEGOHMS
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BODY DIAMETER0.190 INCHES NOMINAL IN
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE-10.0 TO 15.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION
TERMINAL LENGTH1.250 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
42581041-101Interchangeable
interchangeable cross-reference
interchangeable
MILC39014-6Interchangeable
interchangeable cross-reference
interchangeable
M39014-06-0113Interchangeable
interchangeable cross-reference
interchangeable
M39014/06-0165Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-39014/6Interchangeable
interchangeable cross-reference
interchangeable
CK13BR473MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CKR13BX104KP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CKR13BX104KP?
CKR13BX104KP is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace CKR13BX104KP?
There are 15 known substitutes for CKR13BX104KP: 42581041-101, MILC39014-6, M39014-06-0113 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CKR13BX104KP?
CKR13BX104KP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-111-4958. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CKR13BX104KP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026