PartsTable
Technical Data Sheet
PartsTable / MRO / CK62AY470M
CK62AY470M ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_length: 0.550 INCHES NOMINAL IN, body_diameter: 0.120 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN, reliability_indicator: NOT ESTABLISHED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-244-8846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CK62AY470M
NSN: 5910-00-244-8846
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.550 INCHES NOMINAL IN
body_diameter0.120 INCHES NOMINAL IN
terminal_length1.250 INCHES MINIMUM IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-20.00 TO 20.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
capacitance_value_per_section47.000 PICOFARADS SINGLE SECTION
NSN5910-00-244-8846
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN CK62AY470M MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
BODY LENGTH: 0.550 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 81349-MIL-C-11015/11 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL: CERAMIC CASE
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 2.0000
•
TERMINAL SURFACE TREATMENT: SOLDER
•
INSULATION RESISTANCE AT REFERENCE TEMP: 200000.0 MEGOHMS
•
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE: -80.0 TO 30.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BODY LENGTH0.550 INCHES NOMINAL IN
TEST DATA DOCUMENT81349-MIL-C-11015/11 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIALCERAMIC CASE
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT2.0000
TERMINAL SURFACE TREATMENTSOLDER
INSULATION RESISTANCE AT REFERENCE TEMP200000.0 MEGOHMS
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE-80.0 TO 30.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER0.315 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
TOLERANCE RANGE PER SECTION-20.00 TO 20.00 PERCENT SINGLE SECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
655801Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-11015/11Interchangeable
interchangeable cross-reference
interchangeable
MILC11015-11Interchangeable
interchangeable cross-reference
interchangeable
CK62AW472KInterchangeable
interchangeable cross-reference
interchangeable
695008-472Interchangeable
interchangeable cross-reference
interchangeable
0811010X5G0 472ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CK62AY470M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CK62AY470M?
CK62AY470M is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace CK62AY470M?
There are 22 known substitutes for CK62AY470M: 655801, MIL-C-11015/11, MILC11015-11 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CK62AY470M?
CK62AY470M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-244-8846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CK62AY470M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026