PartsTable
Technical Data Sheet
PartsTable / MRO / CK08BX222K
CK08BX222K ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.130 INCHES NOMINAL IN, body_height: 0.045 INCHES NOMINAL IN, body_length: 0.130 INCHES NOMINAL IN, terminal_length: 1.500 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-430-8256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CK08BX222K
NSN: 5910-00-430-8256
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.130 INCHES NOMINAL IN
body_height0.045 INCHES NOMINAL IN
body_length0.130 INCHES NOMINAL IN
terminal_length1.500 INCHES MAXIMUM IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
NSN5910-00-430-8256
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN CK08BX222K MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
TEST DATA DOCUMENT: 81349-MIL-C-11015+24 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
•
CAPACITANCE VALUE PER SECTION: 2200.000 PICOFARADS SINGLE SECTION
•
TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION
•
RELIABILITY INDICATOR: NOT ESTABLISHED
•
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE: -25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
•
TERMINAL SURFACE TREATMENT: SOLDER
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 2.5000
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
TEST DATA DOCUMENT81349-MIL-C-11015+24 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
CAPACITANCE VALUE PER SECTION2200.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION-10.00 TO 10.00 PERCENT SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE-25.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
TERMINAL SURFACE TREATMENTSOLDER
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT2.5000
MATERIALPLASTIC CASE
INSULATION RESISTANCE AT REFERENCE TEMP100000.0 MEGOHMS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
CK08BX332KInterchangeable
interchangeable cross-reference
interchangeable
MIL-C-11015/24Interchangeable
interchangeable cross-reference
interchangeable
CK08BX332MInterchangeable
interchangeable cross-reference
interchangeable
MILC11015Interchangeable
interchangeable cross-reference
interchangeable
CK43BX222KInterchangeable
interchangeable cross-reference
interchangeable
7901102-24Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CK08BX222K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CK08BX222K?
CK08BX222K is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace CK08BX222K?
There are 29 known substitutes for CK08BX222K: CK08BX332K, MIL-C-11015/24, CK08BX332M and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CK08BX222K?
CK08BX222K is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-430-8256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CK08BX222K

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026