PartsTable
Technical Data Sheet
Download PDF

CI0135 — CONTOURING INSTRUMENT,MATRIX,DEN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CI0135: CONTOURING INSTRUMENT,MATRIX,DEN.

CONTOURING INSTRUMENT,MATRIX,DEN. Key specifications include material: ALUMINUM ALLOY HANDLE, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.108 INCHES MINIMUM AND 2.154 INCHES MAXIMUM IN, double_end_feature: INCLUDED, center_hole_diameter: 1.908 INCHES MINIMUM AND 1.942 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-130-7326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CI0135
NSN: 5331-01-130-7326
NIINs: 011307326, 014699052
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialALUMINUM ALLOY HANDLE
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter2.108 INCHES MINIMUM AND 2.154 INCHES MAXIMUM IN
special_featuresCOMPOSITE PLASTIC FILLING INSTRUMENT; LARGE ROUND PLUGGER FOR CONDENSING AND MEDIUM BLADE SIZE FOR SHAPING LARGER CLASS 1, 2, AND 5 RESTORATIONS
double_end_featureINCLUDED
center_hole_diameter1.908 INCHES MINIMUM AND 1.942 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-130-7326
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CI0135 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.108 INCHES MINIMUM AND 2.154 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CENTER HOLE DIAMETER: 1.908 INCHES MINIMUM AND 1.942 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.108 INCHES MINIMUM AND 2.154 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE331 MAXIMUM
CENTER HOLE DIAMETER1.908 INCHES MINIMUM AND 1.942 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
2-135N674-70Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-135Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D-18543 ITEM 5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
GD0-097-000Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10617878-135Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7-57-193Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy CI0135?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CI0135?
CI0135 is a CONTOURING INSTRUMENT,MATRIX,DEN.
What parts can replace CI0135?
There are 8 known substitutes for CI0135: 2-135N674-70, 2-135, D-18543 ITEM 5 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CI0135?
CI0135 is cataloged in the U.S. Government catalog under NSN 5331-01-130-7326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CI0135

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.