PartsTable
Technical Data Sheet
CHD15MF-5 ✓ Verified by PartsTable
· WIRE CABLE
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: COPPER FIRST MORTISE, conductor_form: STRANDED ALL CONDUCTORS, overall_length: 5.000 FEET FT, termination_type: CONNECTOR PLUG BOTH ENDS ALL CONDUCTORS, precious_material: GOLD, conductor_quantity: 15. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6150-01-518-4525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CHD15MF-5
NSN: 6150-01-518-4525
FSC: 6150
CAGE: 43321 — INFINITE ELECTRONICS INTERNATIONAL, INC. DIV L-COM (USA)
SPECIFICATIONS
materialCOPPER FIRST MORTISE
conductor_formSTRANDED ALL CONDUCTORS
overall_length5.000 FEET FT
termination_typeCONNECTOR PLUG BOTH ENDS ALL CONDUCTORS
precious_materialGOLD
conductor_quantity15
round_conductor_size26 AWG ALL CONDUCTORS
end_item_identification23TV PC CABINET
precious_material_and_locationCONTACT SURFACE GOLD
accessory_wire_type_and_quantity1 DRAIN
NSN6150-01-518-4525
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: CHD15MF-5 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CONDUCTOR QUANTITY: 15
MATERIAL: COPPER FIRST MORTISE
ACCESSORY WIRE TYPE AND QUANTITY: 1 DRAIN
TERMINATION TYPE: CONNECTOR PLUG BOTH ENDS ALL CONDUCTORS
ROUND CONDUCTOR SIZE: 26 AWG ALL CONDUCTORS
CONDUCTOR FORM: STRANDED ALL CONDUCTORS
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCONNECTORS - MALE 15 PIN HIGH DENSITY D-SUB (1), FEMALE 15 POSITION HIGH DENSITY D-SUB (1); CABLE - ALUMINUM POLYESTER SHIELD; JACKET - LIGHT GRAY PVC; 2 X 4-40 KNURLED JACKSCREWS; MOLDED PVC HOOD AND STRAIN RELIEF (2)
CONDUCTOR QUANTITY15
END ITEM IDENTIFICATION23TV PC CABINET
MATERIALCOPPER FIRST MORTISE
ACCESSORY WIRE TYPE AND QUANTITY1 DRAIN
TERMINATION TYPECONNECTOR PLUG BOTH ENDS ALL CONDUCTORS
ROUND CONDUCTOR SIZE26 AWG ALL CONDUCTORS
CONDUCTOR FORMSTRANDED ALL CONDUCTORS
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD
PRECIOUS MATERIALGOLD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
TRD855SZ-5Interchangeable
interchangeable cross-reference
interchangeable
TRD855SZ-1-OD1Interchangeable
interchangeable cross-reference
interchangeable
9000705Interchangeable
interchangeable cross-reference
interchangeable
CCF6QS-05-OD1Interchangeable
interchangeable cross-reference
interchangeable
CCF6QS-6Interchangeable
interchangeable cross-reference
interchangeable
9000705-100 ITEM 115Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CHD15MF-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CHD15MF-5?
CHD15MF-5 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace CHD15MF-5?
There are 25 known substitutes for CHD15MF-5: TRD855SZ-5, TRD855SZ-1-OD1, 9000705 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CHD15MF-5?
CHD15MF-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6150-01-518-4525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CHD15MF-5