PartsTable
Technical Data Sheet
Download PDF

CH8-106 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CH8-106: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4037 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK, nut_length: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, nut_diameter: 0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-151-5433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CH8-106
NSN: 5310-00-151-5433
FSC: 5310 — Nuts and Washers
CAGE: 3H464 — BOLLHOFF INC. DBA BOLLHOFF RIVNUT INC (USA)
SPECIFICATIONS
materialSTEEL COMP 4037 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK
nut_length0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
nut_diameter0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
thread_class2B
head_diameter0.355 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.164 INCHES IN
head_countersink_angle99.00 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM
NSN5310-00-151-5433
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CH8-106 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HEAD COUNTERSINK ANGLE: 99.00 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS
NUT LENGTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HEAD COUNTERSINK ANGLE99.00 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
GN512D08-106Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CH8-106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CH8-106?
CH8-106 is a NUT,PLAIN,BLIND RIVET.
What parts can replace CH8-106?
There is 1 known substitute for CH8-106: GN512D08-106. Substitute compatibility should be verified for your specific system.
What is the NSN for CH8-106?
CH8-106 is cataloged in the U.S. Government catalog under NSN 5310-00-151-5433. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CH8-106

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.