PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CH4M
CH4M ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.170 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-287-7706, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CH4M
NSN: 5340-01-287-7706
FSC: 5340
CAGE: 1NJK8 — BURNDY LLC (USA)
SPECIFICATIONS
diameter0.170 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.626 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.438 INCHES NOMINAL IN
NSN5340-01-287-7706
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CH4M MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.438 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.626 INCHES NOMINAL IN
•
DIAMETER: 0.170 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.438 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.626 INCHES NOMINAL IN
DIAMETER0.170 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
710876-4Upgraded Successor
successor cross-reference
successor
HP-4NUpgraded Successor
successor cross-reference
successor
A05764Upgraded Successor
successor cross-reference
successor
642AS2504-4Upgraded Successor
successor cross-reference
successor
0356742Upgraded Successor
successor cross-reference
successor
99-060-4199Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CH4M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CH4M?
CH4M is a CLAMP,LOOP.
What parts can replace CH4M?
There are 9 known substitutes for CH4M: 710876-4, HP-4N, A05764 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CH4M?
CH4M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-287-7706. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CH4M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026