PartsTable
Technical Data Sheet
Download PDF

CH49250-4-10P — CHANNEL,GANG

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CH49250-4-10P: CHANNEL,GANG.

The CHANNEL,GANG is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 0.552 INCHES MAXIMUM IN, overall_height: 0.298 INCHES MAXIMUM IN, overall_length: 72.000 INCHES NOMINAL IN, surface_treatment: PRIMER. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-494-7362, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CH49250-4-10P
NSN: 5310-01-494-7362
FSC: 5310 — Nuts and Washers
CAGE: 15653 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width0.552 INCHES MAXIMUM IN
overall_height0.298 INCHES MAXIMUM IN
overall_length72.000 INCHES NOMINAL IN
special_featuresNUT SPACING IS 1.250 IN NOM/INSIDE WIDTH OF CHANNEL IS 0.445 IN NOM/THICKNESS OF CHANNEL WALL IS 0.032 IN NOM/MATERIAL CRES PER AMS 5510 IN
surface_treatmentPRIMER
NSN5310-01-494-7362
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CH49250-4-10P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PRIMER
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.298 INCHES MAXIMUM IN
OVERALL LENGTH72.000 INCHES NOMINAL IN
OVERALL WIDTH0.552 INCHES MAXIMUM IN
SPECIAL FEATURESNUT SPACING IS 1.250 IN NOM/INSIDE WIDTH OF CHANNEL IS 0.445 IN NOM/THICKNESS OF CHANNEL WALL IS 0.032 IN NOM/MATERIAL CRES PER AMS 5510 IN
SURFACE TREATMENTPRIMER
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
BCH464C10PSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CN170SC4-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CH49250-4-10P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CH49250-4-10P?
CH49250-4-10P is a CHANNEL,GANG.
What parts can replace CH49250-4-10P?
There are 2 known substitutes for CH49250-4-10P: BCH464C10P, CN170SC4-10. Substitute compatibility should be verified for your specific system.
What is the NSN for CH49250-4-10P?
CH49250-4-10P is cataloged in the U.S. Government catalog under NSN 5310-01-494-7362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CH49250-4-10P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.