PartsTable
Technical Data Sheet
Download PDF

CH2528-080 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

CH2528-080: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4037 OR STEEL COMP 8740 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT, nut_length: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, head_height: 0.058 INCHES NOMINAL IN, temp_rating: 232.0 CELSIUS MAXIMUM DEGC. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-355-6989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CH2528-080
NSN: 5310-01-355-6989
FSC: 5310 — Nuts and Washers
CAGE: 03481 — BFGOODRICH CO THE AEROSPACE DIV ENGINEERED POLYMER PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 4037 OR STEEL COMP 8740 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT
nut_length0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
head_height0.058 INCHES NOMINAL IN
temp_rating232.0 CELSIUS MAXIMUM DEGC
nut_diameter0.328 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_class3B
head_diameter0.460 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
thread_seriesUNF
shank_end_typeOPEN
thread_directionRIGHT-HAND
NSN5310-01-355-6989
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CH2528-080 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.058 INCHES NOMINAL IN
•
NUT LENGTH: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
TEMP RATING: 232.0 CELSIUS MAXIMUM DEGC
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.058 INCHES NOMINAL IN
NUT LENGTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
TEMP RATING232.0 CELSIUS MAXIMUM DEGC
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
SHANK END TYPEOPEN
HEAD STYLEFLAT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
GN512C4-080Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CH2528-080?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CH2528-080?
CH2528-080 is a NUT,PLAIN,BLIND RIVET.
What parts can replace CH2528-080?
There is 1 known substitute for CH2528-080: GN512C4-080. Substitute compatibility should be verified for your specific system.
What is the NSN for CH2528-080?
CH2528-080 is cataloged in the U.S. Government catalog under NSN 5310-01-355-6989. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CH2528-080

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.