PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CH2084A
CH2084A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, outside_diameter: 1.125 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.875 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-605-5019, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CH2084A
NSN: 5330-00-605-5019
FSC: 5330
CAGE: 87915 — TITAN PUMP AND ENGINEERING (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
outside_diameter1.125 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.875 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR METAL
NSN5330-00-605-5019
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CH2084A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
MATERIAL: ALUMINUM ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE DIAMETER0.875 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
MATERIALALUMINUM ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
S2815Interchangeable
interchangeable cross-reference
interchangeable
D1AZ-6505-AInterchangeable
interchangeable cross-reference
interchangeable
WWP521Interchangeable
interchangeable cross-reference
interchangeable
2089Interchangeable
interchangeable cross-reference
interchangeable
105454Interchangeable
interchangeable cross-reference
interchangeable
1E5114Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CH2084A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CH2084A?
CH2084A is a GASKET.
What parts can replace CH2084A?
There are 11 known substitutes for CH2084A: S2815, D1AZ-6505-A, WWP521 and 8 more. Substitute compatibility should be verified for your specific system.
Is CH2084A still available?
CH2084A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CH2084A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026