The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, special_features: BOLT DIA 9/32, center_hole_diameter: 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, cross-sectional_height: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN, material_document_and_classification: MIL-R-25988,TYPE I,CLASS 1,GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-494-8098, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
CGR1601-0125-9
NSN:5331-01-494-8098 FSC:5331 — O-ring CAGE:86044 — CALIFORNIA GASKET AND RUBBER CORPORATION DBA CALIFORNIA GAKET & RUBBER CORP (USA)
SPECIFICATIONS
material
RUBBER FLUOROSILICONE CLASS FQ
hardness_rating
70.0 SHORE DUROMETER A NOMINAL
special_features
BOLT DIA 9/32
center_hole_diameter
0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
cross-sectional_height
0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
material_document_and_classification
MIL-R-25988,TYPE I,CLASS 1,GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agency
PREFORMED-MINATURE O-RING (FOR SEALING BOLTS)
NSN
5331-01-494-8098
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988,TYPE I,CLASS 1,GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT
0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
HARDNESS RATING
70.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-25988,TYPE I,CLASS 1,GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURES
BOLT DIA 9/32
CENTER HOLE DIAMETER
0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCY
PREFORMED-MINATURE O-RING (FOR SEALING BOLTS)
MATERIAL
RUBBER FLUOROSILICONE CLASS FQ
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CGR1601-0125-9?
CGR1601-0125-9 is a O-RING.
What parts can replace CGR1601-0125-9?
There are 4 known substitutes for CGR1601-0125-9: 00270-025 F70, LRC63047-9, 7M80-9 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CGR1601-0125-9?
CGR1601-0125-9 is cataloged in the U.S. Government catalog under NSN 5331-01-494-8098. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.