PartsTable
Technical Data Sheet
Download PDF

CF1PB — ENCLOSURE,PUSH BUTTON

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

CF1PB: ENCLOSURE,PUSH BUTTON.

The ENCLOSURE,PUSH BUTTON is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, stud_length: 1.5000 INCHES NOMINAL IN, thread_class: 3A A, overall_width: 3.81 INCHES NOMINAL IN, stud_diameter: 0.6250 INCHES NOMINAL IN, thread_length: 0.7500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-808-2816, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CF1PB
NSN: 3110-00-808-2816
NIINs: 008082816, 016178131
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 03240 — LIFT-A-LOFT, LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
stud_length1.5000 INCHES NOMINAL IN
thread_class3A A
overall_width3.81 INCHES NOMINAL IN
seal_quantity2
stud_diameter0.6250 INCHES NOMINAL IN
thread_length0.7500 INCHES NOMINAL IN
overall_height6.63 INCHES NOMINAL IN
overall_length2.4060 INCHES NOMINAL IN
outer_ring_width0.8750 INCHES NOMINAL IN
special_featuresCMS DATA ID 5919,PCCN, SE0938, PLISN A002
style_designatorCAM FOLLOWER
NSN3110-00-808-2816
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CF1PB · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.8750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.7500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.8750 INCHES NOMINAL IN
THREAD LENGTH0.7500 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH2.4060 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
STUD LENGTH1.5000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
CF1-5-8Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CF1PB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CF1PB?
CF1PB is a ENCLOSURE,PUSH BUTTON.
What parts can replace CF1PB?
There is 1 known substitute for CF1PB: CF1-5-8. Substitute compatibility should be verified for your specific system.
What is the NSN for CF1PB?
CF1PB is cataloged in the U.S. Government catalog under NSN 3110-00-808-2816. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CF1PB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.