PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CF-868-9
CF-868-9 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, surface_treatment: OXIDE OVERALL, pin_overall_length: 0.562 INCHES NOMINAL IN, pin_overall_diameter: 0.0630 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-247-5482, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CF-868-9
NSN: 5315-00-247-5482
FSC: 5315
CAGE: 81772 — CAMERAFLEX CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
surface_treatmentOXIDE OVERALL
pin_overall_length0.562 INCHES NOMINAL IN
pin_overall_diameter0.0630 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-247-5482
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: CF-868-9 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 0.562 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.0630 INCHES NOMINAL IN
•
SURFACE TREATMENT: OXIDE OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL LENGTH0.562 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.0630 INCHES NOMINAL IN
SURFACE TREATMENTOXIDE OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
MS35339-12Interchangeable
interchangeable cross-reference
interchangeable
W110Interchangeable
interchangeable cross-reference
interchangeable
DX263Interchangeable
interchangeable cross-reference
interchangeable
TW110Interchangeable
interchangeable cross-reference
interchangeable
54614HBYInterchangeable
interchangeable cross-reference
interchangeable
85767R91Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CF-868-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CF-868-9?
CF-868-9 is a PIN,STRAIGHT,HEADLESS.
What parts can replace CF-868-9?
There are 9 known substitutes for CF-868-9: MS35339-12, W110, DX263 and 6 more. Substitute compatibility should be verified for your specific system.
Is CF-868-9 still available?
CF-868-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CF-868-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026