PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CF-518-N-S
CF-518-N-S ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include alignment_type: RIGID, overall_length: 1.0620 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM IN, outer_ring_width: 0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN, style_designator: CAM FOLLOWER, end_item_identification: M2A1,M2A2 BFV, overall_outside_diameter: 0.6250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-124-9285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CF-518-N-S
NSN: 3110-01-124-9285
FSC: 3110
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)
SPECIFICATIONS
alignment_typeRIGID
overall_length1.0620 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM IN
outer_ring_width0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
style_designatorCAM FOLLOWER
end_item_identificationM2A1,M2A2 BFV
overall_outside_diameter0.6250 INCHES NOMINAL IN
NSN3110-01-124-9285
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CF-518-N-S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OUTER RING WIDTH: 0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONM2A1,M2A2 BFV
STYLE DESIGNATORCAM FOLLOWER
OUTER RING WIDTH0.4010 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
OVERALL LENGTH1.0620 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
DES10Interchangeable
interchangeable cross-reference
interchangeable
3793-52REVCPC31Interchangeable
interchangeable cross-reference
interchangeable
4810-1-104Interchangeable
interchangeable cross-reference
interchangeable
591-598Interchangeable
interchangeable cross-reference
interchangeable
402-1318-00Interchangeable
interchangeable cross-reference
interchangeable
CRS10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CF-518-N-S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CF-518-N-S?
CF-518-N-S is a BEARING,ROLLER,NEEDLE.
What parts can replace CF-518-N-S?
There are 8 known substitutes for CF-518-N-S: DES10, 3793-52REVCPC31, 4810-1-104 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CF-518-N-S?
CF-518-N-S is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-124-9285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CF-518-N-S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026