PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CES01-6411
CES01-6411 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 15.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-284-2424, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CES01-6411
NSN: 3110-01-284-2424
FSC: 3110
CAGE: S0113 — EBARA MFG CO. (JPN)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width15.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-01-284-2424
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CES01-6411 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
SHIELD QUANTITY: 2
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
SHIELD QUANTITY2
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
3110001448615Interchangeable
interchangeable cross-reference
interchangeable
78AInterchangeable
interchangeable cross-reference
interchangeable
A-A-59585Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/05J04C2BInterchangeable
Same NIIN cross-reference
interchangeable
AA59585-204JCBEInterchangeable
Same NIIN cross-reference
interchangeable
S2-8504 PIECE 056Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CES01-6411?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CES01-6411?
CES01-6411 is a BEARING,BALL,ANNULAR.
What parts can replace CES01-6411?
There are 8 known substitutes for CES01-6411: 3110001448615, 78A, A-A-59585 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CES01-6411?
CES01-6411 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-284-2424. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CES01-6411

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026