PartsTable
Technical Data Sheet
Download PDF

CEC401-214-01 — RING,WIPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CEC401-214-01: RING,WIPER.

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, ring_style: CONCENTRIC, inside_diameter: 0.998 INCHES NOMINAL IN, outside_diameter: 11.953 INCHES MINIMUM AND 12.097 INCHES MAXIMUM IN, material_thickness: 0.300 INCHES MAXIMUM IN, center_hole_diameter: 11.445 INCHES MINIMUM AND 11.505 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-007-5407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CEC401-214-01
NSN: 5330-00-007-5407
NIINs: 000075407, 005850796
FSC: 5330 — Packing and Gasket Materials
CAGE: 07060 — C. E. CONOVER & CO., INC. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
ring_styleCONCENTRIC
inside_diameter0.998 INCHES NOMINAL IN
outside_diameter11.953 INCHES MINIMUM AND 12.097 INCHES MAXIMUM IN
special_featuresSHALL BE COMPATIBLE W/HYDRAULIC FLUID PER MIL-H-6083;TEMP RANGE -65 DEG F THRU + 275 DEG F;MATERIAL NITRILE (BUNA N) DEGF
material_thickness0.300 INCHES MAXIMUM IN
center_hole_diameter11.445 INCHES MINIMUM AND 11.505 INCHES MAXIMUM IN
fsc_application_dataROCKET LAUNCHER ELEVATING MECHANISM
outer_edge_thickness0.109 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
cross-sectional_shape_styleOUTSIDE GROOVED, STRAIGHT FACE
material_document_and_classificationUNABLE TO DECODE
NSN5330-00-007-5407
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CEC401-214-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: ROCKET LAUNCHER ELEVATING MECHANISM
•
OUTER EDGE THICKNESS: 0.109 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED, STRAIGHT FACE
•
OUTSIDE DIAMETER: 1.273 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.300 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 0.998 INCHES NOMINAL IN
•
RING STYLE: CONCENTRIC
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAROCKET LAUNCHER ELEVATING MECHANISM
OUTER EDGE THICKNESS0.109 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED, STRAIGHT FACE
OUTSIDE DIAMETER1.273 INCHES NOMINAL IN
MATERIAL THICKNESS0.300 INCHES MAXIMUM IN
INSIDE DIAMETER0.998 INCHES NOMINAL IN
RING STYLECONCENTRIC
SPECIAL FEATURESSHALL BE COMPATIBLE W/HYDRAULIC FLUID PER MIL-H-6083;TEMP RANGE -65 DEG F THRU + 275 DEG F;MATERIAL NITRILE (BUNA N) DEGF
MATERIALUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 9
704-467416BITEM22Reference document
Same NSN cross-reference
Reference document — Secondary reference
04-4674164Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
2876008Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
56-13-1308Reference document
Same NSN cross-reference
Reference document — Secondary reference
87696-1625ITEM25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
518-4678446ITEM25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy CEC401-214-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CEC401-214-01?
CEC401-214-01 is a RING,WIPER.
What parts can replace CEC401-214-01?
There are 9 known substitutes for CEC401-214-01: 704-467416BITEM22, 04-4674164, 2876008 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CEC401-214-01?
CEC401-214-01 is cataloged in the U.S. Government catalog under NSN 5330-00-007-5407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CEC401-214-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.