PartsTable
Technical Data Sheet
Download PDF

CE202747 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CE202747: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.125 INCHES NOMINAL IN, aperture_diameter: 3.844 INCHES NOMINAL IN, bolt_circle_diameter: 4.375 INCHES NOMINAL IN, outside_corner_radius: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-309-7230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CE202747
NSN: 5330-00-309-7230
FSC: 5330 — Packing and Gasket Materials
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.125 INCHES NOMINAL IN
aperture_diameter3.844 INCHES NOMINAL IN
bolt_circle_diameter4.375 INCHES NOMINAL IN
outside_corner_radius0.375 INCHES NOMINAL IN
cross-sectional_thickness0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center2.250 INCHES NOMINAL IN
NSN5330-00-309-7230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CE202747 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 2.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 3.844 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 4.375 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
•
MATERIAL: CELLULOSE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.009 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER2.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH5.125 INCHES NOMINAL IN
APERTURE DIAMETER3.844 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER4.375 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
MATERIALCELLULOSE OVERALL
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 3
202747Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
P18253Reference document
Same NSN cross-reference
Reference document — Secondary reference
18253Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy CE202747?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CE202747?
CE202747 is a GASKET.
What parts can replace CE202747?
There are 3 known substitutes for CE202747: 202747, P18253, 18253. Substitute compatibility should be verified for your specific system.
What is the NSN for CE202747?
CE202747 is cataloged in the U.S. Government catalog under NSN 5330-00-309-7230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CE202747