PartsTable
Technical Data Sheet
Download PDF

CDV-1413 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CDV-1413: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL OVERALL, loop_width: 0.875 INCHES NOMINAL IN, loop_length: 0.875 INCHES NOMINAL IN, slot_length: 0.500 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-601-0990, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CDV-1413
NSN: 5340-01-601-0990
NIINs: 016010990, 016818931
FSC: 5340 — Hardware, Commercial
CAGE: 75272 — KICKHAEFER MANUFACTURING COMPANY, LLC DBA KICKHAEFER MANUFACTURING CO (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL OVERALL
loop_width0.875 INCHES NOMINAL IN
loop_length0.875 INCHES NOMINAL IN
slot_length0.500 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
overall_length0.968 INCHES NOMINAL IN
special_featuresCUSHION VINYL, MATERIAL 0.060" THICK, DIA OF TUBES 0.875"
style_designatorMULTIPLE LOOP
material_diameter0.048 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
end_item_identificationCRANE TRUCK MOUNTED 0160796974
NSN5340-01-601-0990
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CDV-1413 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 0.875 INCHES NOMINAL IN
•
MATERIAL DIAMETER: 0.048 INCHES NOMINAL IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.817 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMATE ZINC BUCKLE/CLIP
TECHNICAL CHARACTERISTICS
LOOP WIDTH0.875 INCHES NOMINAL IN
MATERIAL DIAMETER0.048 INCHES NOMINAL IN
STYLE DESIGNATORMULTIPLE LOOP
OVERALL WIDTH0.750 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.817 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE ZINC BUCKLE/CLIP
PART NAME ASSIGNED BY CONTROLLING AGENCYCLIP, CSHN .88 ST VY DBL
END ITEM IDENTIFICATION2320-01-564-6882 HET; 4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.815 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYL CUSHION
SUBSTITUTES & CROSS-REFERENCES 3
3926249Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4265926Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
CDV1413Z1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CDV-1413?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CDV-1413?
CDV-1413 is a CLAMP,LOOP.
What parts can replace CDV-1413?
There are 3 known substitutes for CDV-1413: 3926249, 4265926, CDV1413Z1. Substitute compatibility should be verified for your specific system.
What is the NSN for CDV-1413?
CDV-1413 is cataloged in the U.S. Government catalog under NSN 5340-01-601-0990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CDV-1413

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.