PartsTable
Technical Data Sheet
Download PDF

CD32586 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

CD32586: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 1.18000 INCHES NOMINAL IN, thread_class: 3A A, stud_diameter: 0.2500 INCHES NOMINAL IN, thread_length: 0.4370 INCHES NOMINAL IN, overall_length: 1.4770 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-902-4711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CD32586
NSN: 3110-00-902-4711
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length1.18000 INCHES NOMINAL IN
thread_class3A A
stud_diameter0.2500 INCHES NOMINAL IN
thread_length0.4370 INCHES NOMINAL IN
overall_length1.4770 INCHES NOMINAL IN
outer_ring_width0.2810 INCHES NOMINAL IN
special_featuresWITH MEANS FOR RELUBRICATION ON ROLLER END,0.0760 IN. COTTER PIN HOLE DRILLED THROUGH THREAD END OF SHANK IN
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
surface_treatmentCHROMIUM ROLLER
nominal_thread_size0.250 INCHES IN
NSN3110-00-902-4711
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CD32586 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2810 INCHES NOMINAL IN
•
THREAD LENGTH: 0.4370 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2810 INCHES NOMINAL IN
THREAD LENGTH0.4370 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH1.4770 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
STUD LENGTH1.18000 INCHES NOMINAL IN
SPECIAL FEATURESWITH MEANS FOR RELUBRICATION ON ROLLER END,0.0760 IN. COTTER PIN HOLE DRILLED THROUGH THREAD END OF SHANK IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CD32586?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CD32586?
CD32586 is a CAM FOLLOWER,NEEDLE BEARING.
What is the NSN for CD32586?
CD32586 is cataloged in the U.S. Government catalog under NSN 3110-00-902-4711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CD32586

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.