PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CD0074
CD0074 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-143-6783, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CD0074
NSN: 5340-01-143-6783
FSC: 5340
CAGE: F0422 — SAFRAN AEROSYSTEMS EX SAFRAN AEROTECHNICS RLM (FRA)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialSTEEL COMP 321 BAND
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
cushioning_environmental_protectionWEATHER RESISTANT
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.107 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-143-6783
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CD0074 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.874 INCHES MINIMUM AND 0.904 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHION
•
LOOP INSIDE DIAMETER: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET MOUNT
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.874 INCHES MINIMUM AND 0.904 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHION
LOOP INSIDE DIAMETER0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
SURFACE TREATMENTPASSIVATE BAND
MATERIALSTEEL COMP 321 BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
AS21919Upgraded Successor
successor cross-reference
successor
TA1718SS4TUpgraded Successor
successor cross-reference
successor
SAE-AS21919Upgraded Successor
successor cross-reference
successor
10117251Upgraded Successor
successor cross-reference
successor
AS21919WCJ6Upgraded Successor
successor cross-reference
successor
10117317Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CD0074?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CD0074?
CD0074 is a CLAMP,LOOP.
What parts can replace CD0074?
There are 25 known substitutes for CD0074: AS21919, TA1718SS4T, SAE-AS21919 and 22 more. Substitute compatibility should be verified for your specific system.
Is CD0074 still available?
CD0074 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CD0074

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026