PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CD-11
CD-11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: THREADED, thread_class: 2A A, overall_diameter: 1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN, inside_diameter_length: 1.005 INCHES NOMINAL IN, round_cap_outside_surface_condition: RIBBED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-163-9889, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CD-11
NSN: 5340-00-163-9889
FSC: 5340
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeTHREADED
thread_class2A A
overall_diameter1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
inside_diameter_length1.005 INCHES NOMINAL IN
round_cap_outside_surface_conditionRIBBED
thread_size_and_series/type_designator1.000-14 UNS
NSN5340-00-163-9889
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CD-11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 1.005 INCHES NOMINAL IN
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1.000-14 UNS
•
OVERALL DIAMETER: 1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
•
DESIGN TYPE: THREADED
•
ROUND CAP OUTSIDE SURFACE CONDITION: RIBBED
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER LENGTH1.005 INCHES NOMINAL IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR1.000-14 UNS
OVERALL DIAMETER1.031 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
DESIGN TYPETHREADED
ROUND CAP OUTSIDE SURFACE CONDITIONRIBBED
MATERIALPLASTIC, POLYETHYLENE (PP)
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
CD11Interchangeable
interchangeable cross-reference
interchangeable
15062Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CD-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CD-11?
CD-11 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace CD-11?
There are 2 known substitutes for CD-11: CD11, 15062. Substitute compatibility should be verified for your specific system.
What is the NSN for CD-11?
CD-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-163-9889. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CD-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026