PartsTable
Technical Data Sheet
Download PDF

CD-023-12-18CP — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

CD-023-12-18CP: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, peripheral_diameter: 0.996 INCHES MINIMUM AND 0.998 INCHES MAXIMUM IN, center_hole_diameter: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_height: 0.877 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN, end_item_identification: VALVE, GLOBE, 2.0 NPS, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-553-0079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CD-023-12-18CP
NSN: 5330-01-553-0079
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
peripheral_diameter0.996 INCHES MINIMUM AND 0.998 INCHES MAXIMUM IN
center_hole_diameter0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_height0.877 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN
end_item_identificationVALVE, GLOBE, 2.0 NPS
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-553-0079
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CD-023-12-18CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.877 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 0.996 INCHES MINIMUM AND 0.998 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.877 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER0.996 INCHES MINIMUM AND 0.998 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONVALVE, GLOBE, 2.0 NPS
MATERIALPLASTIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
CC 1200 2010 S PL PART NO.18CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7383858-CC12002010S-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS27595-212Reference document
Same NSN cross-reference
Reference document — Secondary reference
H547-0001-CC12002010S-18D0Reference document
Same NSN cross-reference
Reference document — Secondary reference
H547-0001-CC12002010S-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
CC 1200 2010 S PL PART NO.18Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CD-023-12-18CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CD-023-12-18CP?
CD-023-12-18CP is a RETAINER,PACKING.
What parts can replace CD-023-12-18CP?
There are 8 known substitutes for CD-023-12-18CP: CC 1200 2010 S PL PART NO.18CP, 7383858-CC12002010S-18, MS27595-212 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CD-023-12-18CP?
CD-023-12-18CP is cataloged in the U.S. Government catalog under NSN 5330-01-553-0079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CD-023-12-18CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.