PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CCV1317
CCV1317 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: PLASTIC CUSHION, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-231-7718, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CCV1317
NSN: 5340-00-231-7718
FSC: 5340
CAGE: 75272 — KICKHAEFER MANUFACTURING COMPANY, LLC DBA KICKHAEFER MANUFACTURING CO (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialPLASTIC CUSHION
overall_width1.000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.656 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.156 INCHES NOMINAL IN
NSN5340-00-231-7718
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CCV1317 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.656 INCHES NOMINAL IN
•
DIAMETER: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
MATERIALPLASTIC CUSHION
OVERALL WIDTH1.000 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.656 INCHES NOMINAL IN
DIAMETER0.531 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.156 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
8169230Interchangeable
interchangeable cross-reference
interchangeable
55-05Interchangeable
interchangeable cross-reference
interchangeable
161Interchangeable
interchangeable cross-reference
interchangeable
2088600-1Interchangeable
interchangeable cross-reference
interchangeable
1851786Interchangeable
interchangeable cross-reference
interchangeable
49799Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CCV1317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CCV1317?
CCV1317 is a CLAMP,LOOP.
What parts can replace CCV1317?
There are 8 known substitutes for CCV1317: 8169230, 55-05, 161 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CCV1317?
CCV1317 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-231-7718. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CCV1317

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026