CCR75CG270GM — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

CCR75CG270GM: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.160 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN, terminal_diameter: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-261-2210, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CCR75CG270GM

NSN: 5910-01-261-2210
FSC: 5910 — Capacitors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_length	0.160 INCHES NOMINAL IN
body_diameter	0.090 INCHES NOMINAL IN
terminal_length	1.250 INCHES MINIMUM IN
terminal_diameter	0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
reliability_indicator	ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-20/27 GOVERNMENT SPECIFICATION
tolerance_range_per_section	-2.00 TO 2.00 PERCENT SINGLE SECTION
NSN	5910-01-261-2210

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.090 INCHES NOMINAL IN

•

TERMINAL DIAMETER: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN

•

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 0.0 SINGLE SECTION

•

BODY STYLE: W/O MTG FACILITIES, AXIAL TERMINALS

•

TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.250 INCHES MINIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.090 INCHES NOMINAL IN
TERMINAL DIAMETER	0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION
BODY STYLE	W/O MTG FACILITIES, AXIAL TERMINALS
TOLERANCE RANGE PER SECTION	-2.00 TO 2.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.250 INCHES MINIMUM IN
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	200.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 9

MIL-C-20/27Reference document

Same NSN cross-reference

Reference document — Secondary reference

0160-4786Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CCR75CG270GSSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MIL-PRF-20/27Reference document

Same NSN cross-reference

Reference document — Identification reference

7637619P0006Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

CCR75CG270GRReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy CCR75CG270GM?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CCR75CG270GM?

CCR75CG270GM is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace CCR75CG270GM?

There are 9 known substitutes for CCR75CG270GM: MIL-C-20/27, 0160-4786, CCR75CG270GS and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for CCR75CG270GM?

CCR75CG270GM is cataloged in the U.S. Government catalog under NSN 5910-01-261-2210. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CCR75CG270GM — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — CCR75CG270GM