PartsTable
Technical Data Sheet
Download PDF

CCR3-4S — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

CCR3-4S: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RACE, stud_length: 0.8750 INCHES MINIMUM AND 0.9063 INCHES MAXIMUM IN, thread_class: 2A A, stud_diameter: 0.3750 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM IN, thread_length: 0.3750 INCHES MINIMUM IN, overall_length: 1.4063 INCHES MINIMUM AND 1.4376 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-008-6684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CCR3-4S
NSN: 3110-00-008-6684
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)
SPECIFICATIONS
materialSTEEL OUTER RACE
stud_length0.8750 INCHES MINIMUM AND 0.9063 INCHES MAXIMUM IN
thread_class2A A
seal_quantity2
stud_diameter0.3750 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM IN
thread_length0.3750 INCHES MINIMUM IN
overall_length1.4063 INCHES MINIMUM AND 1.4376 INCHES MAXIMUM IN
outer_ring_width0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
special_featuresOD CROWNED ON A 10 IN. RADIUS,MEANS FOR RELUBRICATION IN
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
bearing_seal_typeCONTACT
NSN3110-00-008-6684
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CCR3-4S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.3750 INCHES MINIMUM IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
THREAD LENGTH0.3750 INCHES MINIMUM IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH1.4063 INCHES MINIMUM AND 1.4376 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
STUD LENGTH0.8750 INCHES MINIMUM AND 0.9063 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 3
CCF3-4SReference document
Same NSN cross-reference
Reference document — Secondary reference
3110PL0779015Reference document
Same NSN cross-reference
Reference document — Informative reference only
12265534-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CCR3-4S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CCR3-4S?
CCR3-4S is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace CCR3-4S?
There are 3 known substitutes for CCR3-4S: CCF3-4S, 3110PL0779015, 12265534-3. Substitute compatibility should be verified for your specific system.
What is the NSN for CCR3-4S?
CCR3-4S is cataloged in the U.S. Government catalog under NSN 3110-00-008-6684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CCR3-4S