PartsTable
Technical Data Sheet
PartsTable / MRO / CCR14UJ270GM
CCR14UJ270GM ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.150 INCHES MAXIMUM IN, body_height: 0.080 INCHES MAXIMUM IN, body_length: 0.150 INCHES MAXIMUM IN, terminal_length: 1.250 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-258-3313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CCR14UJ270GM
NSN: 5910-01-258-3313
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.150 INCHES MAXIMUM IN
body_height0.080 INCHES MAXIMUM IN
body_length0.150 INCHES MAXIMUM IN
terminal_length1.250 INCHES MINIMUM IN
terminal_diameter0.016 INCHES NOMINAL IN
reliability_indicatorESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-20/48 GOVERNMENT SPECIFICATION
NSN5910-01-258-3313
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN CCR14UJ270GM MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
TERMINAL DIAMETER: 0.016 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
SCHEMATIC DIAGRAM DESIGNATOR: NO COMMON OR GROUNDED ELECTRODE(S)
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 0.100 INCHES NOMINAL IN
•
CAPACITANCE VALUE PER SECTION: 27.000 PICOFARADS SINGLE SECTION
•
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS: -120.0 TO 120.0 SINGLE SECTION
•
BODY HEIGHT: 0.080 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
TERMINAL DIAMETER0.016 INCHES NOMINAL IN
TEST DATA DOCUMENT81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.100 INCHES NOMINAL IN
CAPACITANCE VALUE PER SECTION27.000 PICOFARADS SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-120.0 TO 120.0 SINGLE SECTION
BODY HEIGHT0.080 INCHES MAXIMUM IN
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP10000.0 MEGOHMS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
SR151A820JAAInterchangeable
interchangeable cross-reference
interchangeable
255459-1Interchangeable
interchangeable cross-reference
interchangeable
DB44BY820JInterchangeable
interchangeable cross-reference
interchangeable
MIL-C-20/48Interchangeable
interchangeable cross-reference
interchangeable
CN15C271GInterchangeable
interchangeable cross-reference
interchangeable
CCR14CG271GMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CCR14UJ270GM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CCR14UJ270GM?
CCR14UJ270GM is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace CCR14UJ270GM?
There are 18 known substitutes for CCR14UJ270GM: SR151A820JAA, 255459-1, DB44BY820J and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CCR14UJ270GM?
CCR14UJ270GM is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-258-3313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CCR14UJ270GM

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026