PartsTable
Technical Data Sheet

CCF-1/2-C-P-1 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

CCF-1/2-C-P-1: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 STUD, stud_length: 0.6250 INCHES NOMINAL IN, thread_class: 2A A, stud_diameter: 0.1900 INCHES NOMINAL IN, thread_length: 0.2500 INCHES NOMINAL IN, overall_length: 1.0310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-413-6321, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CCF-1/2-C-P-1
NSN: 3110-00-413-6321
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 92563 — MCGILL MANUFACTURING CO, INC (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 STUD
stud_length0.6250 INCHES NOMINAL IN
thread_class2A A
seal_quantity2
stud_diameter0.1900 INCHES NOMINAL IN
thread_length0.2500 INCHES NOMINAL IN
overall_length1.0310 INCHES NOMINAL IN
outer_ring_width0.3750 INCHES NOMINAL IN
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
bearing_seal_typeCONTACT
surface_treatmentOXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
NSN3110-00-413-6321
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CCF-1/2-C-P-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.2500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZYTEL 101,DUPONT GO MFR REF SINGLE MATERIAL RESPONSE SEAL
•
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3750 INCHES NOMINAL IN
THREAD LENGTH0.2500 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
MATERIAL DOCUMENT AND CLASSIFICATIONZYTEL 101,DUPONT GO MFR REF SINGLE MATERIAL RESPONSE SEAL
OVERALL LENGTH1.0310 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 3
CCF1-2S2JReference document
Same NSN cross-reference
Reference document — Secondary reference
CCF-1/2S-C-P-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
GB523R1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy CCF-1/2-C-P-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CCF-1/2-C-P-1?
CCF-1/2-C-P-1 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace CCF-1/2-C-P-1?
There are 3 known substitutes for CCF-1/2-C-P-1: CCF1-2S2J, CCF-1/2S-C-P-1, GB523R1. Substitute compatibility should be verified for your specific system.
What is the NSN for CCF-1/2-C-P-1?
CCF-1/2-C-P-1 is cataloged in the U.S. Government catalog under NSN 3110-00-413-6321. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CCF-1/2-C-P-1