PartsTable
Technical Data Sheet
PartsTable / MRO / CC52LH560G
CC52LH560G ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_length: 0.120 INCHES NOMINAL IN, body_diameter: 0.550 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN, reliability_indicator: NOT ESTABLISHED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-989-9712, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CC52LH560G
NSN: 5910-00-989-9712
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.120 INCHES NOMINAL IN
body_diameter0.550 INCHES NOMINAL IN
terminal_length1.250 INCHES MINIMUM IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
tolerance_range_per_section-2.00 TO 2.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
capacitance_value_per_section56.000 PICOFARADS SINGLE SECTION
NSN5910-00-989-9712
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN CC52LH560G MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
BODY STYLE: W/O MTG FACILITIES, RADIAL TERMINALS
•
BODY DIAMETER: 0.550 INCHES NOMINAL IN
•
TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PERCENT SINGLE SECTION
•
SCHEMATIC DIAGRAM DESIGNATOR: NO COMMON OR GROUNDED ELECTRODE(S)
•
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS: -60.0 TO 60.0 SINGLE SECTION
•
TEST DATA DOCUMENT: 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: -80.0 SINGLE SECTION
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER: 0.315 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
BODY STYLEW/O MTG FACILITIES, RADIAL TERMINALS
BODY DIAMETER0.550 INCHES NOMINAL IN
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-60.0 TO 60.0 SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS-80.0 SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER0.315 INCHES MINIMUM AND 0.435 INCHES MAXIMUM IN
CAPACITANCE VALUE PER SECTION56.000 PICOFARADS SINGLE SECTION
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP1000.0 MEGOHMS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
31HY470Interchangeable
interchangeable cross-reference
interchangeable
CC52CH470KInterchangeable
interchangeable cross-reference
interchangeable
0811020C0H0 470GInterchangeable
interchangeable cross-reference
interchangeable
CC52UJ101GInterchangeable
interchangeable cross-reference
interchangeable
831-000-X5F0-101KInterchangeable
interchangeable cross-reference
interchangeable
0811020U2J0 101GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC52LH560G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC52LH560G?
CC52LH560G is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace CC52LH560G?
There are 19 known substitutes for CC52LH560G: 31HY470, CC52CH470K, 0811020C0H0 470G and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CC52LH560G?
CC52LH560G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-989-9712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC52LH560G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026