PartsTable
Technical Data Sheet
Download PDF

CC514-6-5 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

CC514-6-5: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 END PLATE, stud_length: 0.5740 INCHES MINIMUM AND 0.6210 INCHES MAXIMUM IN, thread_class: 3A A, stud_diameter: 0.1900 INCHES NOMINAL IN, thread_length: 0.2780 INCHES NOMINAL IN, overall_length: 0.8410 INCHES MINIMUM AND 0.9080 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-133-6749, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CC514-6-5
NSN: 3110-00-133-6749
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 3NPS1 — RBC AIRCRAFT PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 END PLATE
stud_length0.5740 INCHES MINIMUM AND 0.6210 INCHES MAXIMUM IN
thread_class3A A
stud_diameter0.1900 INCHES NOMINAL IN
thread_length0.2780 INCHES NOMINAL IN
overall_length0.8410 INCHES MINIMUM AND 0.9080 INCHES MAXIMUM IN
outer_ring_width0.1860 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN
style_designatorCAM FOLLOWER
thread_directionRIGHT-HAND
surface_treatmentCADMIUM END PLATE
nominal_thread_size0.190 INCHES IN
lubrication_materialGREASE
NSN3110-00-133-6749
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: CC514-6-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.1860 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.2780 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
MATERIAL DOCUMENT AND CLASSIFICATION: VASCO 350 CVM,87665 MFR REF SINGLE MATERIAL RESPONSE OUTER RING
•
OVERALL OUTSIDE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.1860 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN
THREAD LENGTH0.2780 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
MATERIAL DOCUMENT AND CLASSIFICATIONVASCO 350 CVM,87665 MFR REF SINGLE MATERIAL RESPONSE OUTER RING
OVERALL LENGTH0.8410 INCHES MINIMUM AND 0.9080 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.3745 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
STUD LENGTH0.5740 INCHES MINIMUM AND 0.6210 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
CC4293-6-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C4293-6-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy CC514-6-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC514-6-5?
CC514-6-5 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace CC514-6-5?
There are 2 known substitutes for CC514-6-5: CC4293-6-1, C4293-6-1. Substitute compatibility should be verified for your specific system.
What is the NSN for CC514-6-5?
CC514-6-5 is cataloged in the U.S. Government catalog under NSN 3110-00-133-6749. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC514-6-5