PartsTable
Technical Data Sheet
PartsTable / MRO / CC50UJ100G
CC50UJ100G ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_length: 0.120 INCHES NOMINAL IN, body_diameter: 0.280 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN, terminal_diameter: 0.025 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-853-2201, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CC50UJ100G
NSN: 5910-00-853-2201
FSC: 5910
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.120 INCHES NOMINAL IN
body_diameter0.280 INCHES NOMINAL IN
terminal_length1.250 INCHES MINIMUM IN
terminal_diameter0.025 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-20/16D GOVERNMENT SPECIFICATION
tolerance_range_per_section-0.25 TO 0.25 PICOFARADS SINGLE SECTION
NSN5910-00-853-2201
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN CC50UJ100G MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP: 1000.0 MEGOHMS
•
TOLERANCE RANGE PER SECTION: -2.00 TO 2.00 PICOFARADS SINGLE SECTION
•
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: -750.0 SINGLE SECTION
•
TEST DATA DOCUMENT: 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER: 0.250 INCHES NOMINAL IN
•
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: 500.0 DC SINGLE SECTION
•
TERMINAL TYPE AND QUANTITY: 2 UNINSULATED WIRE LEAD
•
TERMINAL LENGTH: 1.250 INCHES MINIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP1000.0 MEGOHMS
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PICOFARADS SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS-750.0 SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER0.250 INCHES NOMINAL IN
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION500.0 DC SINGLE SECTION
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
TERMINAL LENGTH1.250 INCHES MINIMUM IN
BODY LENGTH0.120 INCHES NOMINAL IN
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-120.0 TO 120.0 SINGLE SECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
CAInterchangeable
interchangeable cross-reference
interchangeable
0160-0214Interchangeable
interchangeable cross-reference
interchangeable
831U2M100FInterchangeable
interchangeable cross-reference
interchangeable
0831020U2J0 100GInterchangeable
Same NIIN cross-reference
interchangeable
MILC20-16Interchangeable
Same NIIN cross-reference
interchangeable
831-020U2J0-100GInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC50UJ100G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC50UJ100G?
CC50UJ100G is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace CC50UJ100G?
There are 6 known substitutes for CC50UJ100G: CA, 0160-0214, 831U2M100F and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CC50UJ100G?
CC50UJ100G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-00-853-2201. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC50UJ100G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026