PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CC2811
CC2811 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.343 INCHES NOMINAL IN, material: STEEL COMP 1010 BAND, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-252-7871, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CC2811
NSN: 5340-01-252-7871
FSC: 5340
CAGE: 75272 — KICKHAEFER MANUFACTURING COMPANY, LLC DBA KICKHAEFER MANUFACTURING CO (USA)
SPECIFICATIONS
diameter0.343 INCHES NOMINAL IN
materialSTEEL COMP 1010 BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter1.750 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.999 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.000 INCHES NOMINAL IN
NSN5340-01-252-7871
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CC2811 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL COMP 1010 BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.000 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
DIAMETER: 0.343 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL COMP 1010 BAND
OVERALL WIDTH0.750 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.000 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.750 INCHES NOMINAL IN
DIAMETER0.343 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.999 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
10925Upgraded Successor
successor cross-reference
successor
217282Interchangeable
interchangeable cross-reference
interchangeable
182249Interchangeable
interchangeable cross-reference
interchangeable
21969Interchangeable
interchangeable cross-reference
interchangeable
134SN2PC2SPRINGInterchangeable
interchangeable cross-reference
interchangeable
128SN2PC2SPRINGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CC2811?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CC2811?
CC2811 is a CLAMP,LOOP.
What parts can replace CC2811?
There are 13 known substitutes for CC2811: 10925, 217282, 182249 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CC2811?
CC2811 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-252-7871. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CC2811

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026