CC21AK1R5C — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

CC21AK1R5C: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.540 INCHES NOMINAL IN, body_diameter: 0.225 INCHES NOMINAL IN, terminal_length: 1.250 INCHES MINIMUM IN, terminal_diameter: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-018-0112, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ CC21AK1R5C

NSN: 5910-00-018-0112
FSC: 5910 — Capacitors
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_length	0.540 INCHES NOMINAL IN
body_diameter	0.225 INCHES NOMINAL IN
terminal_length	1.250 INCHES MINIMUM IN
terminal_diameter	0.032 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
specification/standard_data	81349-MIL-C-20/2 GOVERNMENT SPECIFICATION
tolerance_range_per_section	-0.25 TO 0.25 PICOFARADS SINGLE SECTION
NSN	5910-00-018-0112

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.225 INCHES NOMINAL IN

•

TERMINAL DIAMETER: 0.032 INCHES NOMINAL IN

•

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 100.0 SINGLE SECTION

•

BODY STYLE: W/O MTG FACILITIES, AXIAL TERMINALS

•

TOLERANCE RANGE PER SECTION: -0.25 TO 0.25 PICOFARADS SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.250 INCHES MINIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.225 INCHES NOMINAL IN
TERMINAL DIAMETER	0.032 INCHES NOMINAL IN
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	100.0 SINGLE SECTION
BODY STYLE	W/O MTG FACILITIES, AXIAL TERMINALS
TOLERANCE RANGE PER SECTION	-0.25 TO 0.25 PICOFARADS SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.250 INCHES MINIMUM IN
QUALITY FACTOR AT REFERENCE TEMP	420.0000
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	500.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 2

MIL-C-20/2Reference document

Same NSN cross-reference

Reference document — Identification reference

315-051M7K0-159CReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy CC21AK1R5C?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is CC21AK1R5C?

CC21AK1R5C is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace CC21AK1R5C?

There are 2 known substitutes for CC21AK1R5C: MIL-C-20/2, 315-051M7K0-159C. Substitute compatibility should be verified for your specific system.

What is the NSN for CC21AK1R5C?

CC21AK1R5C is cataloged in the U.S. Government catalog under NSN 5910-00-018-0112. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

CC21AK1R5C — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — CC21AK1R5C